TCP3 Mocal Kühlpumpe

Geeignet für den Einsatz als Hinterachs- oder Getriebeölpumpe oder für Turboladerölkühlanlagen sowie wassergekühlte Brems Installationen. Diese Pumpe ist selbstansaugend und kann überall relativ zur Aufnahme positioniert werden.

Ein Vorfilter muss vor der Pumpe installiert werden um Schäden zu verhindern!

Diese Pumpe ist nicht für den Einsatz bei brennbaren Flüssigkeiten zugelassen!


DEMAND OPERATION (INTERMITTENT DUTY)
Demand Operation is considered an “intermittent duty” application. The maximum
intermittent duty cycle is that which will cause the motor to reach its maximum
thermal limits. Once the maximum thermal limit is reached, the motor must be
allowed to settle to a lower temperature ideally being ambient before resuming
operation. Running the pump at or near the maximum thermal limit for extended
period of time will shorten the life of the pump and may result in immediate pump failure.
BYPASS OPERATION (IF EQUIPED)
Models equipped with an external bypass system are designed to pump at high
pressures while at low or high flow rates. Models equipped with a bypass only will
continue to run until the power is manually turned off.
The Duplex II pumps are not recommended for continuous duty service due to limited
motor brush life. Operation at lower pressures and temperatures, however, will
extend overall pump service life.